pubsleuthAd revenue calculator

Ad revenue calculator for websites

Pick an ad network, a niche, your monthly traffic, where your readers are and the month, and the calculator returns a low-to-high estimate of what the site earns a month. Every figure is an estimate, and the guide below explains what it rests on and where it can be wrong.

18 minute guideFacts checked 15 November 2026

Calculator

Ad revenue calculator

Start with AdSense or choose another network, then enter your own monthly pageviews. Change one setting at a time and watch the range move.

$76 to $102a month

About $89 from 100,000 pageviews, at $0.89 per 1,000 pageviews.

The niche rates are Google's own: the Americas figures behind the AdSense calculator on Google's AdSense start page (last changed in December 2024), matched from our niches to Google's closest category. Home, DIY & Real Estate blends Home & Garden with Real Estate by its sites' share. The audience and month settings are ours, the same as on our network pages. AdSense Explorer

Every figure here is an estimate, not a promise: a range around a typical site's middle figure, built from each network's published rates and our own synthesis where it publishes none.

Examples

What AdSense pays at common traffic

The table runs AdSense for five niches at five traffic sizes, with readers mostly in the US tier and an average month. The worked situations beside it show how to use the calculator on questions that come up often.

Monthly pageviewsHome, DIY & Real EstateEducation & ExamsFashion & BeautyParenting & KidsNews & Media
10,000$100 to $135$27 to $36$22 to $29$14 to $19$8 to $10
50,000$500 to $677$134 to $182$108 to $147$71 to $96$38 to $51
100,000$1,000 to $1,354$269 to $363$217 to $293$142 to $192$76 to $102
500,000$5,002 to $6,768$1,343 to $1,817$1,084 to $1,466$710 to $960$378 to $512
1,000,000$10,005 to $13,535$2,686 to $3,634$2,168 to $2,933$1,420 to $1,920$757 to $1,023

Monthly estimates for an average month, readers mostly in the US, UK, Canada, Australia or western Europe, at Google's published niche rates. A site with readers elsewhere earns less.

A new blog under 10,000 pageviews

A blog with a few thousand pageviews a month wants to know if ads are worth setting up yet. Choose AdSense, pick the niche closest to the blog, enter the real monthly pageviews and leave the readers setting on the country most of them come from. Read the low figure, not the middle one, because a small site sits wherever its few thousand readers happen to land. Then run the same traffic at the other settings you might meet, a mix of countries or a quiet month, and see the range stretch. If even the high end is small against the time ads would take to place and test, the calculator has given its answer: ads can wait, and the next thing to grow is the traffic. Every network beyond AdSense asks for more than this site has.

A food blog with mostly US readers

A food blog that gets most of its readers from the US wants to know whether it is big enough for one of the managed networks. Choose the network, pick the food niche, set readers to the first option and enter monthly pageviews. If the page shows the entry bar, the sentence under the estimate tells you which number the site is short of, and the network's card tells you which unit that number is in. Pageviews, users and yearly ad revenue are three different measures, and the calculator tests each one against the right figure. Then switch to AdSense with the same traffic and compare the two ranges, remembering that each network counts something different. Open the network's page to see its terms before you apply anywhere.

A news site with readers mostly outside the US

A news site whose readers are mostly in India, the Philippines or Nigeria should not take the first estimate it sees. The calculator starts on the US tier, which is the highest, so change the readers setting first and watch the range fall. News is among the lower-paying niches on AdSense even before the country is counted, and the two settings compound. Then check each network's minimum, because some ask for more traffic when most readers are in countries outside a list. OptAd360, for one, sets a higher figure for countries it does not list. The tiers table on this page shows how the model groups countries, and the explanation of the readers setting says where its limits are.

Comparing two networks that count different units

A publisher choosing between Raptive and Ezoic sees two rates that look nothing alike, because one counts sessions and the other visits. Do not compare the per-1,000 figures. Enter the same pageviews, niche, readers and month for each network, and compare the ranges, which are in dollars a month and so can sit side by side. Check the pages-per-session box: both networks divide your pageviews by it, so a site that gets more pages per visit is counted as fewer sessions. Then read each card, since one rests on publishers' own reports and another on a single benchmark, and a gap between two rough guides is small evidence. Where the ranges overlap, the calculator cannot tell the networks apart, and neither can we.

The same site in December and in January

A site notices its earnings halve between December and January and wonders what broke. Run the calculator twice with the same traffic and the same readers, once with the month set to October to December and once to January. The two ranges differ by the season factor alone, so any gap between them is the market, not the site. Now compare the January range with the figure on your own account. If the real drop is bigger than the calculator's, check something else before you blame ads, such as which countries the readers came from and whether the site's pages per visit fell. Never compare December with January; compare each with the same month of the year before, when that exists.

By network

How to read each network's estimate

Each network counts traffic in its own unit and asks for its own minimum. Read the note on a card before you read the estimate for that network.

AdSense

Counts
pageviews
Minimum to apply
None stated by Google

AdSense counts pageviews, so enter your pageviews as they are and nothing is converted. The niche rates are Google's own: the Americas figures behind the calculator on its AdSense start page, matched from our niches to Google's nearest category. The audience and month settings are ours. Google states no traffic minimum, so the calculator never shows an entry-bar warning for AdSense. Page RPM as Google reports it is already your share, so the estimate is what reaches the publisher, before tax.

AdSense Explorer

Journey by Mediavine

Counts
sessions
Minimum to apply
1,000 sessions in 30 days

Journey, Mediavine's program for small sites, counts sessions. Enter your pageviews and your pages per session, and the calculator divides them. Mediavine publishes no Journey earnings, so the rates are our synthesis of publishers' own reports, checked against their published totals. The minimum to apply is 1,000 sessions in 30 days, and only sessions from the US, UK, Canada and Australia count toward it. The calculator tests your total visits, so a site with mostly other readers may be nearer the bar than the warning says.

Journey on pubsleuth

Ezoic

Counts
visits
Minimum to apply
250,000 monthly users

Ezoic counts visits, its EPMV being earnings per 1,000 visits, so a site with more pages per visit sees a lower figure per pageview. The niche rates are the medians of one benchmark published in July 2026, the only per-niche table framed around Ezoic. New sites need 250,000 monthly users, a count that cannot exceed visits. A site under that figure in the calculator is shown the bar, and may be one that joined before it was set in February 2026.

Ezoic on pubsleuth

Mediavine

Counts
sessions
Minimum to apply
$5,000 ad revenue a year

Mediavine counts sessions. Enter pageviews and pages per session, and the calculator divides them. Mediavine publishes no earnings by niche, so the rates are our synthesis of publishers' own reports, checked against their published totals. Its entry bar is $5,000 of ad revenue a year, not a traffic count, so the calculator multiplies the middle monthly figure by twelve and compares that. Under it, the warning points to Journey, the program for smaller sites.

Mediavine on pubsleuth

Raptive

Counts
sessions
Minimum to apply
25,000 pageviews a month

Raptive counts sessions, and its dashboard RPM has done so since February 2023. Enter pageviews and pages per session. Raptive publishes no earnings by niche, so the rates are our synthesis of publishers' own reports, checked against their published totals, a few of them from one season. Its minimum is 25,000 pageviews a month, since October 2025, and the calculator compares your pageviews with that directly. Under it, the warning names Journey.

Raptive on pubsleuth

The Moneytizer

Counts
visits
Minimum to apply
30,000 unique visitors a month

The Moneytizer counts visits. The Moneytizer says it cannot give an average CPM, and we found no dated dollar report from its publishers, so the rates are our own synthesis: an AdSense survey figure, raised by one publisher's reported gain on switching, and set against Ezoic's published average. Read them as a rough guide. Its help pages state 30,000 unique visitors a month as the minimum, while its US pages ask for 300,000, and the calculator warns under the lower figure.

The Moneytizer on pubsleuth

Monumetric

Counts
visits
Minimum to apply
10,000 pageviews a month

Monumetric counts visits here. Its rates are our synthesis of publishers' own reports, put per visit at 1.3 pages a visit, with two bloggers' income surveys alongside. Monumetric publishes no earnings by niche. The bottom of its Propel program is 10,000 pageviews a month, and the calculator compares your pageviews with that figure directly. A site under it sees a warning that points to Journey, which takes smaller sites. Its revenue share varies by the ad technology a site runs.

Monumetric on pubsleuth

SHE Media

Counts
sessions
Minimum to apply
50,000 pageviews a month

SHE Media counts sessions. It publishes no earnings by niche, so the rates are our synthesis, put per 1,000 sessions at 1.5 pages a session, from bloggers' surveys and a handful of single-site reports with a health site at the high end and travel blogs at the low. Its stated minimum is 50,000 pageviews a month, raised from 20,000. It reviews smaller sites case by case, so the warning is a prompt to ask, not a firm refusal. It publishes no revenue share.

SHE Media on pubsleuth

Playwire

Counts
sessions
Minimum to apply
500,000 pageviews a month (managed)

Playwire counts sessions. Its rates are our synthesis of its own network figures, including what it says a managed site earns at one million sessions and a gaming site against a news site, since it publishes no earnings by niche. The minimum for its managed service, 500,000 pageviews a month, comes from its FAQ, and from about 100,000 it points sites to its self-service option. Under the bar, the calculator names Raptive and Journey for smaller sites.

Playwire on pubsleuth

Freestar

Counts
sessions
Minimum to apply
About 1 million pageviews a month

Freestar counts sessions. It publishes no earnings, and we found no dated dollar figure from a Freestar publisher, so these are the most indirect rates on the page: the per-session levels from our Mediavine and Raptive pages, spread by niche with the ratios the calculators we checked use. Read them as a rough guide. Freestar says it typically looks for about 1,000,000 pageviews a month, which is a size it looks for, not a hard limit, so the warning is softer here.

Freestar on pubsleuth

Publift

Counts
visits
Minimum to apply
$2,000 ad revenue a month

Publift counts visits. Neither Publift nor its publishers publish dollar earnings, so the rates are our synthesis: the medians of a July 2026 benchmark per visit, raised by 40% for header bidding, which is the lift Publift's own figures imply. Its usual minimum is $2,000 a month in ad revenue, so the calculator compares twelve times the middle monthly figure with the yearly equivalent. Publift says it still talks to faster-growing sites below it.

Publift on pubsleuth

Media.net

Counts
visits
Minimum to apply
None published; by contact only

Media.net counts visits here. It publishes no earnings, and its publisher agreement treated RPM figures as confidential, so the rates are our synthesis: Google's own AdSense values for each niche, raised for the search and header-bidding demand Media.net adds, checked against one affiliate review. Its page lists no minimum, only contact, so the calculator never shows an entry-bar warning for it, and that silence says nothing about approval. A site has to ask.

Media.net on pubsleuth

Next Millennium

Counts
visits
Minimum to apply
None published; approval after a call

Next Millennium counts visits here. It publishes no network average, so the rates are our synthesis, taken from the middle of the range its own 2026 blog gives for sites of 1.5 to 10 million pageviews, and checked against the average CPM in its referral terms. Smaller sites sit well under that blog's range, so read their estimate as stretched. It publishes no minimum, only approval after a call, so the calculator shows no entry-bar warning.

Next Millennium on pubsleuth

Infolinks

Counts
visits
Minimum to apply
No published number

Infolinks counts visits here, and its estimate counts Infolinks' own ads only, on top of anything else the site runs, not instead of it. It publishes no earnings by niche, and we found no dated report from 2024 to 2026 with a stated unit, so the rates are our synthesis from one tech blogger's range, spread by what advertisers pay per click in each niche. It lists no minimum, so the calculator shows no entry-bar warning.

Infolinks on pubsleuth

OptAd360

Counts
visits
Minimum to apply
50,000 pageviews a month; 500,000 in some countries

OptAd360 counts visits here. It publishes no earnings in dollars, and we found no publisher report that gives them, so the rates are our synthesis: the medians of a July 2026 benchmark per visit for header-bidding networks, with the month factors taken from OptAd360's own revenue index. Treat them as a rough guide. Its minimum is 50,000 pageviews a month for 86 countries it lists, and 500,000 for every other country, India among them, and the calculator warns under the lower figure.

OptAd360 on pubsleuth

Setupad

Counts
visits
Minimum to apply
100,000 visitors a month

Setupad counts visits here. Neither Setupad nor its publishers publish earnings in money, so the rates are our synthesis: the medians of a July 2026 benchmark per visit, raised by 30%, the lift over AdSense that Setupad itself claims, and checked against one review's figure for a site at its bar. The minimum it lists for managed header bidding is 100,000 visitors a month, a count of people, so the calculator compares your visits with it, and a few repeat visitors may leave a site just under.

Setupad on pubsleuth

By country

How the readers' country changes it

Where your readers live changes the estimate more than almost any other setting. These are the tiers our model uses to scale a US rate for readers elsewhere.

Where the readers areShare of the US rateA $10 US rate becomes
United States100%$10.00
UK, Canada, Australia and similar80%$8.00
Western Europe, Japan and similar50%$5.00
Brazil, Mexico, Turkey, Poland and similar20%$2.00
India, Indonesia, the Philippines and similar11%$1.10
Pakistan, Bangladesh and similar6%$0.60

The full list of countries by tier is on AdSense RPM by niche.

Guide, part 1 of 12

How the calculator works

The calculator multiplies your traffic by a rate. The traffic is a monthly count, and the rate is dollars per 1,000 of the thing the network counts. The result is a middle figure, with a band placed around it that gives the low and high ends.

  1. 1

    Start from traffic

    You enter monthly pageviews. For a network that counts visits or sessions, the calculator divides the pageviews by the pages per visit or session you give it, and holds that number between 1 and 10.

  2. 2

    Look up the rate

    The niche you pick selects a dollar rate per 1,000 visits, sessions or pageviews. A niche the network has no rate for gets that network's fallback rate, shown as Another niche.

  3. 3

    Scale for readers and month

    The rate is multiplied by a factor for where readers are and a factor for the month. Both are settings, and both are ours, apart from the regional exception for AdSense described below.

  4. 4

    Put a band around it

    The middle figure becomes a range by taking a fixed share off for the low end and adding it for the high end. The band is the same for every network, about 15% each way.

In words: visits, or sessions, or pageviews, divided by 1,000, times the rate, times the readers factor, times the month factor. That is the middle. The low is a little under it and the high a little over.

What the output says

Below the range, the page prints the middle figure, the traffic it was computed from and the rate it used per 1,000. If you want to check the arithmetic, those three numbers are enough. If you enter nothing, or a figure that is not a positive number, the page asks for your monthly pageviews and shows no range.

The calculator does not know your site or your account. It is arithmetic on the numbers you give it.

The calculator does not measure your site. It applies a rate we have put together from published sources to the traffic you enter. Treat the result as a place to start a conversation with your own numbers, not as a forecast.

Contents
Guide, part 2 of 12

The inputs, and where to find yours in Google Analytics

There are five inputs and one more that appears for some networks. Each has a place in Google Analytics 4 where your real figure lives. Use a full calendar month, not a day or a week, so a quiet or busy stretch does not tilt the answer.

Monthly pageviews

In Google Analytics 4, open the Reports section, then Engagement, then Pages and screens. The column named Views is the pageview count for the date range you pick. Set the range to a full month and enter that total. If you use another analytics tool, look for its pageview figure rather than its visitors figure, because the calculator is asking for pageviews on purpose.

Pages per visit or session

This box appears only for networks that count visits or sessions. Divide your views for the month by your sessions for the month, and enter the result. Sessions are in Reports, then Acquisition, then Traffic acquisition. The box starts at 1.5, which is a placeholder, not a measurement of your site.

Niche

Pick the group closest to what the site is about. The list differs by network, since each network's page has rates for the niches its sources covered. If none fits, pick Another niche, which uses a single fallback rate. The AdSense RPM by niche page explains how our niches map to Google's categories.

Where readers are

Open the Demographic details report (in a standard setup it sits under Reports, then User attributes) and choose Country. Find the countries that bring most of your readers. If most are in the US, the UK, Canada, Australia or western Europe, pick the first option. If they come from a spread of countries, pick the middle one. If most come from India, Southeast Asia, Latin America or Africa, pick the last. The tiers are explained in the section on readers.

Month

Choose the month you are estimating. An average month is the default. The other choices are October to December, July and January, plus the first month on a network where that network's page sets one. The month section says what each does.

Contents
Guide, part 3 of 12

Visits, sessions and pageviews: why the same site gets three rates

A reader who opens three pages in a sitting is one visit, one session and three pageviews. A network that pays per 1,000 sessions divides its money by one, and a network that pays per 1,000 pageviews divides it by three. The same money gives a bigger number in the first case. That is why the rates on this page cannot be set side by side.

What each network's rate counts in the calculator
CountsNetworks
PageviewsAdSense
SessionsJourney, Mediavine, Raptive, SHE Media, Playwire, Freestar
VisitsEzoic, The Moneytizer, Monumetric, Publift, Media.net, Next Millennium, Infolinks, OptAd360, Setupad

The calculator hides the difference from you. You always enter pageviews, and for a network that counts sessions or visits, the page divides by the pages per session or visit you also give. It treats a visit and a session alike, as pageviews divided by pages per visit. The output then says how many of the network's units that came to, and what rate was used per 1,000 of them.

Two worked conversions from the networks themselves

Mediavine gives its own example: at 1.5 pages a session, $30 per session is $20 per pageview. Ezoic gives another: at 2 pages a visit, a $10 EPMV is a $5 page RPM. Both examples run the same way: the per-session or per-visit figure is the page figure times the pages per visit.

That is why the pages-per-visit box matters for these networks and why it is missing for AdSense. For AdSense the calculator assumes one, because the rate is already per pageview.

What it means when you compare

A network's rate per session is not a better rate than AdSense's per pageview. It is a larger number for a different count. To compare, enter the same traffic for each and read the monthly ranges, which share a unit: dollars a month. Even then, do not read a difference between two ranges as proof. They rest on different evidence, as the next section explains.

Never compare an RPM from one network's dashboard with one from another until you know whether it counts pageviews, sessions or visits. The page RPM entry defines the AdSense one.

Contents
Guide, part 4 of 12

Where each network's rate comes from, and why it is an estimate

Only one network has a published table of rates. Google's AdSense calculator carries a figure for each of 25 categories and three regions, and ours for AdSense are those figures. For every other network, no table of earnings by niche exists, so every rate here is a synthesis, and the card for each network says what it rests on.

  • Publishers' own reports. Journey, Mediavine, Raptive, Monumetric and SHE Media rest on figures bloggers and site owners have published, with a month and, where stated, a unit. Where we have one, we check the rate against the report's own total.
  • The network's own worked example. Ezoic gives an average for its largest sites, and Playwire gives figures for its own network, such as what a managed site makes at a million sessions. Next Millennium's blog gives a range for sites of a given size.
  • One benchmark per visit. Ezoic, Publift, OptAd360 and Setupad all lean on the medians of State of Digital Publishing's July 2026 benchmark, with Publift's and Setupad's raised by the lift each network claims for itself.
  • Google's own AdSense values. Media.net's rates start from Google's figure for each niche, raised for the demand Media.net says it adds.
  • Indirect estimates. The Moneytizer and Freestar publish no earnings, and we found no dated dollar report from their publishers. Their rates are built from the other networks' evidence, and the page marks them as a rough guide.

Those are five different kinds of evidence, and a rate built on one is not the same strength as a rate built on another. The estimate cards say which is which.

What a network does not say

Mediavine, Raptive, Journey, Monumetric, SHE Media and Playwire publish no earnings by niche. Neither does any other network on this page except Google. A table of niche rates that you find elsewhere was made by someone from data you cannot see. The AdSense RPM by niche page sets out which published figures we do and do not trust.

A rate is also a point in time. The sources are dated 2022 to 2026, and a network's earnings change as its demand and its publishers do. The calculator's rates are as they stood on the date at the top of the page.

Contents
Guide, part 5 of 12

Why the answer is a range

The calculator never returns a single number, for two reasons. The middle figure is a guess, and a guess has a spread. And the number a site earns varies month to month for reasons no model sees.

The range on the page is the middle figure about 15% either way. That is narrow, and it is the calculator's own band, set the same for every network. It is not the full range of what a site can earn. A site with the same traffic and the same readers can earn well outside it, and the question to ask is how far.

How wide the real spread is

For AdSense, our model's estimates for a site have a wider band than the one shown here. A true figure is typically within 0.4 to 2.5 times the model's middle. That is the honest spread, and it is wide because ad density, formats, viewability, the season and the account's own click history are unknown to us. The calculator's narrower band is the part of the spread caused by the rate being uncertain, and not the part caused by the site.

The practical reading: take the middle, then think of the true figure as sitting anywhere from well below to well above it. Use the low end for a plan that cannot go wrong, and the high end for the most you could reasonably expect.

A range is not a promise at either end. A site can land outside it, and the ends are not a floor or a ceiling.

If the low end of the range would already be worth it, the decision is easy. If only the high end is, the estimate does not tell you much, and your own account's figures matter more.

Contents
Guide, part 6 of 12

Where readers are: the audience setting and the country tiers

Advertisers pay different amounts to reach readers in different countries, so the same page earns a different amount depending on where it is read. The readers setting is how the calculator takes that into account.

It has three choices. The first is mostly the US, UK, Canada, Australia or western Europe, which leaves the rate as it is. The second is a mix of countries, or mostly Japan or Korea, which takes about a third off. The third is mostly India, Southeast Asia, Latin America or Africa, which takes about two thirds off. These three are the groupings that the ad calculators we checked use.

Not the same as the tiers table

The six tiers shown lower on this page are a finer scale that our traffic model uses for AdSense sites it estimates. The calculator's setting has only three steps, because a visitor is more likely to know the broad group than the precise mix. Pick the step nearest to your country report and be aware that the middle one covers a lot of ground.

The AdSense exception

Google's own calculator splits by three regions, not by tier, and those regions are continents. They blend the US with Latin America, and Europe with Africa. We use Google's Americas figure for each niche and let the readers setting adjust it, because Google's other two regions come out within about a tenth of the Americas for most niches, and a continent says little about a country.

What others have reported

  • One travel blog on Raptive with about a quarter of its readers in the US reported a lower figure per session than a nearly all-US travel blog did.
  • Mediavine says a site with under 65% of its traffic from the US takes longer to settle after joining.
  • Raptive put a wine blog's lower RPM down partly to fewer US readers.

Each of those is one site's report, not a rule. They agree on the direction, which is the thing the setting captures. Open the table of tiers on this page for the model's own scale, and the AdSense RPM by niche page for the detail on each tier.

Contents
Guide, part 7 of 12

The month setting: the January and July drop

Advertiser budgets rise and fall through the year, and what a pageview earns moves with them. The month setting lets you estimate a particular month. An average month leaves the rate alone.

  • October to December raises the rate. Raptive says ad spending peaks from mid-November to Christmas.
  • July lowers it a little. Mediavine's help page says RPM drops in July as budgets reset.
  • January lowers it more. Raptive says the start of January is typically the lowest point of the year, and Mediavine's help page puts the drop in January and July at 40 to 60%.
  • The first month on a network, where a network's page sets it, lowers the rate, because sites often take a month or more to settle after a move.

The factors that the calculator uses are ours. A network's own statement of a drop is a statement of its biggest swing in its worst days, and the calculator's January factor is milder than that on purpose, so that a month's estimate is not the worst day's figure.

Using it to read your own results

Run the same traffic through two months and read the difference: it is the part of any change that the calendar explains. If your account moves by much more than that, something else changed.

Google's own calculator holds one figure for the year, so it hides the season altogether. A page RPM measured in December says little about April.

A fall in January is the market, not your site. Compare January with last January, and December with last December.

Contents
Guide, part 8 of 12

Entry bars: what the calculator says under a network's minimum

Most networks have a minimum. When your traffic is under it, a sentence appears under the range naming the bar and, usually, a network that takes smaller sites. The estimate is still shown, because it tells you what the traffic would earn if the site were let in.

The bars are in different units, and the calculator tests each against the right figure:

What each kind of bar is compared with
The bar is inCompared withNetworks
PageviewsYour monthly pageviewsRaptive, Monumetric, SHE Media, Playwire, Freestar, OptAd360
Users or visitorsYour visitsEzoic, The Moneytizer, Setupad
SessionsYour visitsJourney
Yearly ad revenueTwelve times the middle figureMediavine, Publift
No bar publishedNothingAdSense, Media.net, Next Millennium, Infolinks

A site cannot have more users than visits, so a visits figure under a users bar means the users are under it too. That is why the visits comparison is safe in one direction. It is not safe in the other: a site over the bar in visits may still be under it in users.

What the sentence does not mean

  • It is not a verdict. Some networks review smaller sites case by case, and some grandfather sites that joined before a bar was raised, as Ezoic does for sites from before February 2026.
  • It can understate. Journey counts only sessions from four countries, and the calculator tests all your visits, so a site with mostly other readers may be under the bar when the page says it is over.
  • It can overstate. The Moneytizer's French help pages and its US pages state different bars, and OptAd360 asks for more in the countries it does not list.
  • No sentence is not a yes. Media.net, Next Millennium and Infolinks publish no number, and approval is by contact or by a call.

Each network's page lists the terms in full. Read it before you apply. The best ad networks and AdSense alternatives pages rank networks by the sites that use them.

Contents
Guide, part 9 of 12

How Google's own AdSense calculator works

Google runs a calculator on its AdSense start page. You choose a region and a category, enter monthly pageviews, and it returns a yearly figure. Behind it is one file of numbers: 25 categories, each with a figure for the Americas, for Europe, the Middle East and Africa, and for Asia and the Pacific.

The arithmetic is the same as ours. It divides your pageviews by 1,000, multiplies by the figure, and multiplies by 12 for a year. Each figure is therefore, in effect, a page RPM Google expects for that category and region.

What it averages over, and what it does not say

Google states no method. The file was last changed on 9 December 2024, and nothing says which sites it averages over, how many there are, or which months it covers. The regions are continents, so the Americas figure blends the US with Latin America, and nothing splits mobile from desktop or one country from another. There is one figure for the whole year.

Our AdSense estimate starts from Google's Americas figure for the niche you pick, because Google's other two regions are continents, not traffic tiers. We then apply our own readers and month settings, which Google's calculator does not have. So where Google's calculator gives one yearly number, ours gives a monthly range, and the settings we added are labeled as ours.

Where a niche has no category of its own

Some of our niches have no close Google category. They get the median of Google's Americas figures, which the card for AdSense reflects as Another niche. The match between our niches and Google's categories is our judgment, and it is loosest for tools, religion and astrology, parenting and quotes.

Even so, it is the only first-party figure of its kind. The AdSense Explorer lists what AdSense reports and what Google says about eligibility, and the AdSense RPM by niche page sets Google's figures beside our model's.

Contents
Guide, part 10 of 12

What has already been taken off

Each network keeps a share of what advertisers pay, and the publisher gets the rest. The calculator does not take a further share off, so it matters what each rate already counts.

For AdSense, the figure is page RPM, which Google reports after its own cut. Google's help says the publisher keeps 80% after the buyer's fee, about 68% when Google Ads buys. That 68% is already in the page RPM, so the calculator's AdSense range is what reaches the publisher, before tax. Do not take 32% off again.

For the other networks, the rates come from publishers' reports of what they received, or are built from such reports, so they are meant to be what reaches the publisher. Where a rate was raised by a lift the network claims over AdSense, the page for that network says so.

Check each network's note before you read its figure as take-home pay. A rate built from a benchmark or a network's claim carries more doubt on this point than one built from a publisher's own report.

What the share is, by network

Shares differ and are on each network's page: Journey 70% to the publisher, Mediavine 75% to 90% by tier, Raptive 75%, Infolinks 65%, Setupad 80%. Several networks, including SHE Media, Freestar, Media.net and OptAd360, publish none. Because the shares differ, a rate that is net for one network is not the same share of the advertiser's money as one for another, and the monthly ranges already include it.

Two further things are not taken off. Payment fees and currency conversion are the publisher's own, and each network's payout threshold means money can wait for a month or more before it arrives. Neither changes what was earned.

Contents
Guide, part 11 of 12

How to check the estimate against your own account

The best test of any estimate is the account it is about. If you already run ads, a full month of your own figures says more than any rate on this page.

  1. 1

    Take one full calendar month

    A day or a week swings with the news and with which advertisers had budget left. Use a month that has finished and been paid or reported.

  2. 2

    Enter that month's real traffic

    Use pageviews and pages per visit from your analytics for the same month, and set the readers setting from the country report for it.

  3. 3

    Set the month and niche to match

    Pick the month the figures are from, and the niche nearest to the site.

  4. 4

    Read the range against the real figure

    Inside the range, the estimate fits. Outside it, check the unit first, then the month, then the readers, before you judge the ads.

The unit is the usual cause. Read AdSense's page RPM, and the networks' figures in the unit each network uses, and do not set one beside another.

If it is far off

  • Check that the pageviews you entered are the whole month's, and from the same analytics tool as the earnings are.
  • Check that you picked the readers setting that matches most of your readers, not the one you hoped for.
  • Check the month, since a figure from the fourth quarter overstates a normal month.
  • Check what your network counts. A network's dashboard may report per session or per visit.

Keep a record: the date, what you changed and the figure for the month before and after. After a year it tells you more about your site than any calculator.

Contents
Guide, part 12 of 12

What no calculator knows

A calculator of this kind has the traffic you give it and a rate. Everything else about the site that changes earnings is outside it, and that is where most of the gap between an estimate and a real month comes from.

What the calculator uses

  • Your monthly traffic, in the unit you enter it in.
  • A rate for your niche, from the network's sources.
  • A group for your readers' country and a factor for the month.

What it cannot see

  • Ad density. How many ads sit on a page changes what a page earns, within each network's policies.
  • Viewability. An ad that is never on screen earns little, and the share on screen depends on the layout and the speed of the page.
  • Formats. Video, sticky and in-content units earn differently from a plain banner.
  • Invalid traffic. Bot or accidental clicks are removed or penalized, and they can take earnings back, or limit an account.
  • The account's own history. Click-through and the prices advertisers have paid your pages before.
  • What advertisers bid this month. The auction sets the price, not the publisher.

These are the reasons that a site with the same traffic and the same readers as another can earn a different amount. Several of them are in the publisher's hands, within each network's policies. The calculator can tell you nothing about them, and the narrow band on the page does not cover them.

What never to do to move the number

Do not click your own ads, ask others to click them, or buy traffic. These count as invalid traffic, and the result can be limited ads, deducted earnings or a closed account. A single month's higher figure is not worth it.

The calculator is for planning and for comparing, and it earns its place when you use it that way: to ask whether an arrangement is plausible, which network's terms the site could meet, and what a change in readers or season does. It cannot say what a particular site will earn.

Contents

Questions about ad revenue

How much does a website earn from ads?

It depends on the traffic, the niche, the readers' country, the network and the month, so there is no single figure. Enter your own pageviews in the calculator for a low-to-high range, and treat it as an estimate, not a forecast.

How much does AdSense pay per 1,000 views?

That is page RPM, earnings per 1,000 pageviews. Google's own calculator gives a figure for each of 25 categories and three regions, with no method stated. Your real figure depends on your niche and your readers' country, and it moves by month. The calculator starts from Google's Americas figure and adjusts for readers and month.

How do I calculate ad revenue?

Divide the pageviews, sessions or visits for a month by 1,000, then multiply by the network's rate per 1,000 of the same thing. The calculator does this, then adjusts for where your readers are and for the month. For a real account, take the earnings figure from the network's report.

How accurate is this ad revenue calculator?

It is an estimate. The range shown is about 15% either way, and a true figure can sit well outside it, since we cannot see ad density, formats, viewability, season or an account's own history. Read it as a place to start, then test it against a full month of your own figures.

How much traffic do I need to make $100 a month from ads?

Use the calculator to find out for your own case. Pick the network and niche, set your readers and the month, and try different pageviews until the low end of the range reaches $100. Read the low end, since it is the safer one. The answer will change a lot with the readers' country and the network.

What is RPM and how is it used here?

RPM is revenue per 1,000 of something. It is per pageview on AdSense, per session on Mediavine, Raptive and others, and per visit on Ezoic and others. Here each network's RPM is the rate in the calculator, applied to the units the network counts.

Why do networks show different rates for the same site?

Two reasons. They count different things, so the same money gives a bigger number per session or visit than per pageview. And each rate rests on different evidence, from Google's own table to a single publisher's report. Compare the monthly ranges, not the per-1,000 rates.

Does the calculator include the network's share?

The share is already in the rates. AdSense's page RPM is reported after Google's cut, and the other networks' rates are built from what publishers report receiving. Nothing more is taken off. Check each network's note, since a few rates are built from benchmarks or from claims the network makes.

How much do bloggers make from ads?

Nobody publishes a figure that covers bloggers in general. What exists is single-site reports with a month, and surveys that mix several kinds of income. A single blogger's figure is that blog's own, not a typical one. Use the calculator for your own traffic instead.

Is Google's AdSense calculator accurate?

Google states no method, sample or period for it. Its data file was last changed on 9 December 2024, its regions are continents, and it gives one figure for the whole year. It is the only first-party figure of its kind, but it is an average, not a promise for your site.

How much does Mediavine or Raptive pay?

Neither publishes earnings by niche or a standard rate. Both report per session, not per pageview. The estimates here are our synthesis of publishers' own reports, checked against their published totals, and the card for each network gives what it rests on. Read them as a rough guide.

Why does my real revenue differ from the estimate?

The most common causes are the unit, the month and the readers' country. After that come things the calculator cannot see: ad density, viewability, formats, invalid traffic and what advertisers bid that month. Check the first three before you look at the ads.

Can I use this for a YouTube channel or an app?

No. The calculator is for websites only. Its rates come from publishers' reports and networks' figures for websites, and a video channel or an app earns by different rules, with a different unit and a different share.

Is pubsleuth connected to these ad networks?

No. pubsleuth is independent and not affiliated with any ad network or with Google. We earn nothing from any network named on this page, and there are no affiliate links. The rates are our own synthesis of published sources, and each network's card says what its rate rests on.